Negative!! When you install/upgrade to a new Mobo you need to reinstall from scratch. Motherboards haven't different chipsets that require different drivers. Trust me its alot easier starting fresh. Here's your basic steps.
1) Remove all your Old Crap.. Make room to install new Crap.. (Install New Power supply)
2) Read Your Mobo Guide to make sure you install your Ram and CPU Properly, do this before mounting the Mobo its alot easier. Mount Mobo, make sure all your front panel connections (Power, Reset, Speaker, etc.) are connected correctly. You also might have to swap out the I/O Shield in the back of your case.
3) Install Graphic Card
4) Install/Connect Hardrives, CD/RW. Floppie, Etc.
5) Make sure everything is connected and be Tidy with the wiring.. Try not to mess up Airflow to much.
6) Have OS Handy and Power Up Puter, Go staright to BIOS, check all settings, follow guide.
7) Install OS..
8) Here's where you have to pay attention. Your Puter will now start with New OS, you now need to install Mobo Drivers, On Mobo CD.., Restart Puter etc.
9) Install Grpahics Driver
10) Tweak System a little.. Test Graphics if you wish.
11) Install Sound or is intergrated on Mobo install drivers for it from Mobo CD.
You get the idea.. One thing at a time and just take your time.. Set up each item after you install it test to make sure.. Good Luck Have Fun!!