Just ask the Rukee!!
- Thread starter Rukee
- Start date
-
Two Factor Authentication is now available on BeyondUnreal Forums. To configure it, visit your Profile and look for the "Two Step Verification" option on the left side. We can send codes via email (may be slower) or you can set up any TOTP Authenticator app on your phone (Authy, Google Authenticator, etc) to deliver codes. It is highly recommended that you configure this to keep your account safe.
No...sorry.
i`ve never had any problems like what you disscribed.
But then again.....I use Athlon equipment not intell.
That might be part of your problem.
In the BOIS of one of my boards is an option for ata66 or 100....did you look in there???
i`ve never had any problems like what you disscribed.
But then again.....I use Athlon equipment not intell.
That might be part of your problem.
In the BOIS of one of my boards is an option for ata66 or 100....did you look in there???
yeah, i think i narrowed it down, when you install NT based OS's on an NTFS partition, you have to have the ata66 (u66) driver installed first (F6 to install 3rd party drivers) before you install win2K or winXP. So basically i've destroyed the file i needed so i will have to remake it.
TheRealFluffy
Retired Attention Whore
Rukee, any good files to make my Windows 98SE a bit cleaner? Registry cleaners, hard disk cleaners, Windows Cleaners?
Or is the only way to get the speed back up a format c:?
Or is the only way to get the speed back up a format c:?
Here is a good utility for cleaning up your computer....and it`s free
CLEAN SYSTEM DIRECTORY for win 98
also if you don`t manage your own virtual memory I would do that too. Right click my computer and click proprties, then virtual memory. A good rule of thumb to use is two and a half times your real on board memory. so if you have 128mb set the min and max virtual memory settings to 320mb. MAKE SURE THE MIN AND MAX ARE EXACLY THE SAME!! Or your puter just might not start!! Als be sure to only make this change AFTER a defrag. the first thing after the defrag. Also look at the file system and make sure it says network server and read ahead is set to full.
Give those a try and report back.
Alarm Points
Rukee, I've been reading through these posts and have found that you are the man to ask for help. Maybe you can help with this also? I map for Monster Hunt mod. Dratted triggers. K, heres what i've done. I'm helping build a map for MH (monster hunt) and doing some triggering. Well after the counter and getting the door to open after the count is up I can't get the stupid brutes to follow there alarm points. Help!!!
Rukee, I've been reading through these posts and have found that you are the man to ask for help. Maybe you can help with this also? I map for Monster Hunt mod. Dratted triggers. K, heres what i've done. I'm helping build a map for MH (monster hunt) and doing some triggering. Well after the counter and getting the door to open after the count is up I can't get the stupid brutes to follow there alarm points. Help!!!
Yes I would try that same 2 1\2 times ratio.....
and that cleaner will work with winME...but not sure on XP.
Re: Alarm Points
sorry....I know verry little about mapping.....all I know could be found in my one great map DM-Toberus}{. Take a look at it mabee it would be good for the MH MOD.
I would post you problem in the advanced level editing section of the forum.
sorry....I know verry little about mapping.....all I know could be found in my one great map DM-Toberus}{. Take a look at it mabee it would be good for the MH MOD.
I would post you problem in the advanced level editing section of the forum.
Re: Re: Alarm Points
he did, none of us really know, and the tutorials reguarding alarm points are few and far between.
he did, none of us really know, and the tutorials reguarding alarm points are few and far between.
![[DecoY]](/data/avatars/s/27/27165.jpg?1424422830){kind=avatar}
