will this setup work?
- Thread starter TurdDrive
- Start date
-
Two Factor Authentication is now available on BeyondUnreal Forums. To configure it, visit your Profile and look for the "Two Step Verification" option on the left side. We can send codes via email (may be slower) or you can set up any TOTP Authenticator app on your phone (Authy, Google Authenticator, etc) to deliver codes. It is highly recommended that you configure this to keep your account safe.
I think it will only go in one way up since the screw holes need to line up at the back of the case.
Check the manual..
http://www.antec.com/Believe_it/index.php?page=ProductManuals
Also, check the manual for the mainboard, to compare pin layouts before connecting front IO panels; like USB, FireWire, (...).
gl
http://www.antec.com/Believe_it/index.php?page=ProductManuals
Also, check the manual for the mainboard, to compare pin layouts before connecting front IO panels; like USB, FireWire, (...).
gl
Turddrives Computer
Well I am nearing completion of my rig and lucky I noticed on the MOBO layout that there where to fan connection things.
Which one should I connect the CPU fan to?
1. 4 Pin CPU fan
2. 3 Pin PWR_FAN
Also are the Molex power connectors stackable
As in I can keep adding on to them?
I shall probably be adding more to this thread.
Thanks
Well I am nearing completion of my rig and lucky I noticed on the MOBO layout that there where to fan connection things.
Which one should I connect the CPU fan to?
1. 4 Pin CPU fan
2. 3 Pin PWR_FAN
Also are the Molex power connectors stackable
As in I can keep adding on to them?
I shall probably be adding more to this thread.
Thanks
I got all excited when I saw this thread and though they were going to take people who watch "The hills" and ship them to the desert with no food 
4 Pin CPU fan for the processors fan
some power supplies (mid rand or high end), have a separate connector that can connect to the motherboard 3 Pin PWR_FAN
these give the fans power sure... so it doesn't actually mater too much as long as the fans keep going round but connect them correctly for perfection as they allow for the fan speeds to be correctly regulated and for the rotation speeds to vary
some power supplies (mid rand or high end), have a separate connector that can connect to the motherboard 3 Pin PWR_FAN
these give the fans power sure... so it doesn't actually mater too much as long as the fans keep going round but connect them correctly for perfection as they allow for the fan speeds to be correctly regulated and for the rotation speeds to vary
plugs like on that one?
yea, you can stack those.
best stack all the fans and plug it on one of the cables on the psu and dont put anything else on that one.
yea, you can stack those.
best stack all the fans and plug it on one of the cables on the psu and dont put anything else on that one.
lol that's a load of crap. I've had my PSU installed fan side up in my Antec 900 for a few years now.
shadow_dragon
is ironing his panties!
Do we have 3 seperate threads themed on your new computer now?
Can't you try and centralise these updates a little?
Can't you try and centralise these updates a little?
<facepalm> Never mind... just don't make any more.
But yeah -- often now -- even though this should come with your CASE -- not your motherboard -- cases come with 3 anchors and 6 clips.
Yeah... I just realized what you said... sorry. My bad, never mind.
But yeah -- often now -- even though this should come with your CASE -- not your motherboard -- cases come with 3 anchors and 6 clips.
Yeah... I just realized what you said... sorry. My bad, never mind.
