1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Two Factor Authentication is now available on BeyondUnreal Forums. To configure it, visit your Profile and look for the "Two Step Verification" option on the left side. We can send codes via email (may be slower) or you can set up any TOTP Authenticator app on your phone (Authy, Google Authenticator, etc) to deliver codes. It is highly recommended that you configure this to keep your account safe.

UDK Demo - How To Configure The Game? - Help on Perfomance/Controls

Discussion in 'The Ball' started by Hourences, Nov 5, 2009.

  1. Hourences

    Hourences New Member

    Joined:
    Aug 29, 2000
    Messages:
    5,050
    Likes Received:
    0
    Configuring UDK Demo

    We are aware that the settings menu in the The Ball UDK Demo is suboptimal. This is an issue that we will fix later on. The first version of the UDK has very limited back end support for a settings menu so we were greatly limited in what functionality we could offer in the menu. We are very sorry for this.

    You can modify all settings through the ini files. Make sure the game is not running, and go to this directory:

    C:\UDK\The Ball UDK Demo\UTGame\Config​

    ______________________________________________________________________
    Perfomance

    Open UTEngine.ini in notepad. And look for the section "[SystemSettings]" - it is pretty far down.

    By default the game uses high quality settings. To gain perfomance, set following settings like this:

    DynamicShadows=False
    AmbientOcclusion=False (major impact - try to turn this off first)
    LensFlares=False
    FogVolumes=False
    DetailMode=0

    Changing these will get you the most perfomance. All other settings will only have a minor impact. Alternatively you can also set DynamicLights=False. This will give you another few FPS more, but note that there is a small dark section near the end of the level that relies on a flashlight.​

    ______________________________________________________________________
    Controls

    By default the game uses these controls:
    WASD or Arrows: Walking forward and strafing or driving forward and turning
    Control or Spacebar: Jump and skip cutscene
    Shift or C: Crouch
    Left Mouse Button: Hammers the ball away
    Right Mouse Button: Attracts and guides the ball.
    E or Enter: Use Vehicle and skip cutscene

    Xbox360 gamepad is also supported.

    If you would however like to change your keys, in the same directory, open UTInput.ini. Find the section "Engine.PlayerInput" - located at the top.

    Find the ones you want to change, for example:

    Bindings=(Name="W",Command="GBA_MoveForward")

    May become

    Bindings=(Name="E",Command="GBA_MoveForward")

    Now E will make you walk forward. Don't forget to check for any duplicate bindings. In this case "E" is also used as a "Use" key so you will have to move the "use" key to another key.​
     
    Last edited: Nov 5, 2009

Share This Page