1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Two Factor Authentication is now available on BeyondUnreal Forums. To configure it, visit your Profile and look for the "Two Step Verification" option on the left side. We can send codes via email (may be slower) or you can set up any TOTP Authenticator app on your phone (Authy, Google Authenticator, etc) to deliver codes. It is highly recommended that you configure this to keep your account safe.

swinging trap door clipping...

Discussion in 'Mapping' started by Prowler, Oct 9, 2000.

  1. Prowler

    Prowler "Building Better Worlds"

    Joined:
    Jul 6, 2000
    Messages:
    599
    Likes Received:
    0
    i am making a trap and i made it so that the player is to walk onto a set of trap doors, and into the welcoming arms of death by spikes, the only problem with this is that when the player walks onto the set of doors, he falls through the doors like they were not there, how can i make them work? i created a trigger aswell but the player does not set it off since he falls throught the un-opened doors.:p
    is there a way to make the proximity more wide?
    thanks
     
  2. Joeman

    Joeman BeanMan<br><img src=me lost Mistar Bean

    Joined:
    Oct 2, 2000
    Messages:
    70
    Likes Received:
    0
    OK
    Here's what you do. right click on the mover to get a popup menue. Just below the moverkeyframe part you'll see a reset part. expand that and select reset scaleing. (you have to do this with all movers to make the solid) Play the map and see how it works!
     
  3. Prowler

    Prowler "Building Better Worlds"

    Joined:
    Jul 6, 2000
    Messages:
    599
    Likes Received:
    0
    ok, i did that, it worked, but it just made the doors smaller, you cant fall throught them, but there really small now!
     
  4. ZodiaK

    ZodiaK irresponsible walrus

    Joined:
    Feb 14, 2000
    Messages:
    910
    Likes Received:
    0
    *clarification*

    you have to use unscaled/rotated brush when intersecting the mover. although the 'reset scaling' works this way also, it should be done before you intersect your mover in the first place.

    as for the trigger's radius, it's somewhere in the trigger properties, just don't remember it right now...
     

Share This Page