1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Two Factor Authentication is now available on BeyondUnreal Forums. To configure it, visit your Profile and look for the "Two Step Verification" option on the left side. We can send codes via email (may be slower) or you can set up any TOTP Authenticator app on your phone (Authy, Google Authenticator, etc) to deliver codes. It is highly recommended that you configure this to keep your account safe.

more complicated movers

Discussion in 'Level Editing - Basic' started by Phenix, Aug 12, 2004.

  1. Phenix

    Phenix Solid Amour system 2.0

    Joined:
    Jul 12, 2004
    Messages:
    13
    Likes Received:
    0
    I'm not 100% sure this is in the right subforum.

    How do you make a mover that splits like a door?
    like one of the doors in DM-Zeto
    I've got two seperate movers currently linked both to switches at either side of the door but both sides dont open at the same time.

    Thank you for your time
     
  2. sandorski

    sandorski New Member

    Joined:
    Sep 22, 1999
    Messages:
    242
    Likes Received:
    0
    Make sure that both Movers are using the same Trigger(s) and that their settings are the same, other than their Keys.
     
  3. Phenix

    Phenix Solid Amour system 2.0

    Joined:
    Jul 12, 2004
    Messages:
    13
    Likes Received:
    0
    Ok thank you
     
  4. divineStorm^

    divineStorm^ New Member

    Joined:
    Nov 14, 2008
    Messages:
    6
    Likes Received:
    0
    Heys!

    I did this on my map, they were 2 bars, one moving left one moving right, in shape of |=| where = are the bars. I did it like so:

    I made the Hole to my map where I wanted them, using the grid ofcourse, you never can tell enough about using teh allmighty grid! Anyways. Then I made the bars, preferably in different room (one about 1024x1024 construction room outside map, delete when done) and then made the movers, putted the bars in place. Then I used key0 as the place when they are closed, and key1 on the other bar on the left and other bar on the right (open position) , Then I made a trigger with event "DoubleBars_RED" and then when you shooted that damage trigger the movers opened in different ways. (If you setted the tag to DoubleBars_RED) , It's done and i'm happy with it ! ;>
     

Share This Page