Joystick Configuration for dual anlog

HashX · 8th Jun 2000, 04:39 PM

Does anyone know of a way to configure both anlogs, setup only allows XY config not IJ.

King Slayer · 8th Jun 2000, 06:34 PM

Hi man! My help wont solve your current problem but probably a long term one. Loose the joystick. The keyboard & mouse config, although a bit difficult to master for a newbie, is the most versatile and all the buttons in the world on the world's best joystick can not compare.

HashX · 9th Jun 2000, 01:59 AM

No way... I beat xan on masterful if thats any good (then i got blessed having to reinstall and lose it!), but if i could get those 2 anlog sticks going it would be much more precice, no taking my hands off to hit other stuff!

I still would like to know how!

[This message has been edited by HashX (edited 06-09-2000).]

King Slayer · 9th Jun 2000, 06:07 AM

Ok man, I see you've got the shot. Now your problemm. First off what kind (brand, buttons/functions, etc.) of joystick are you attempting to use? Let me know and we'll go from there. I've been down this road before...

HashX · 9th Jun 2000, 06:41 AM

Im Using a 3dFx/InterAct HammerHead Fx

2 Shoulder Buttons
2 Trigger Buttons
6 Right Hand Buttons
Digital Control Pad on Left (which will work for 4 cardinal directions not diagonal!)
2 Anlogs

I can configure which ones are which Axi (either x,y,x/y,i,j,i/j)

I was trying to use 4 of the right hand buttons as direction buttons (like a N64 controler) but its just not happening, its prioritizing buttons.

I can also program keyboard functions into all buttons but the digital pad and anlogs.

I know its alot of info but im putting down as much as i can so you don't need anymore =) thanks

King Slayer · 9th Jun 2000, 07:03 AM

Well you've got me stumped, I tried screwing around with setup and some .ini files but to no avail. All I can suggest is to try E-mailing the Epic and see if they can either help you or direct you to some help. Be patient, it'll all work out in the end. I personally just got through a big snag with my own UT problems that took 3 1/2 weeks to get an answer. Best of Luck.

Beer eases pain.

HashX · 9th Jun 2000, 04:21 PM

I found something in the userini that showed something about JoyX=axis.....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

8th Jun 2000, 04:39 PM	#1
HashX Registered User Join Date: Jun. 8th, 2000 Location: Bowie, Md. Posts: 4	Does anyone know of a way to configure both anlogs, setup only allows XY config not IJ.

8th Jun 2000, 06:34 PM	#2
King Slayer Registered User Join Date: Jun. 5th, 2000 Posts: 24	Hi man! My help wont solve your current problem but probably a long term one. Loose the joystick. The keyboard & mouse config, although a bit difficult to master for a newbie, is the most versatile and all the buttons in the world on the world's best joystick can not compare.

9th Jun 2000, 01:59 AM	#3
HashX Registered User Join Date: Jun. 8th, 2000 Location: Bowie, Md. Posts: 4	No way... I beat xan on masterful if thats any good (then i got blessed having to reinstall and lose it!), but if i could get those 2 anlog sticks going it would be much more precice, no taking my hands off to hit other stuff! I still would like to know how! [This message has been edited by HashX (edited 06-09-2000).]

9th Jun 2000, 06:07 AM	#4
King Slayer Registered User Join Date: Jun. 5th, 2000 Posts: 24	Ok man, I see you've got the shot. Now your problemm. First off what kind (brand, buttons/functions, etc.) of joystick are you attempting to use? Let me know and we'll go from there. I've been down this road before...

9th Jun 2000, 06:41 AM	#5
HashX Registered User Join Date: Jun. 8th, 2000 Location: Bowie, Md. Posts: 4	Im Using a 3dFx/InterAct HammerHead Fx 2 Shoulder Buttons 2 Trigger Buttons 6 Right Hand Buttons Digital Control Pad on Left (which will work for 4 cardinal directions not diagonal!) 2 Anlogs I can configure which ones are which Axi (either x,y,x/y,i,j,i/j) I was trying to use 4 of the right hand buttons as direction buttons (like a N64 controler) but its just not happening, its prioritizing buttons. I can also program keyboard functions into all buttons but the digital pad and anlogs. I know its alot of info but im putting down as much as i can so you don't need anymore =) thanks

9th Jun 2000, 07:03 AM	#6
King Slayer Registered User Join Date: Jun. 5th, 2000 Posts: 24	Well you've got me stumped, I tried screwing around with setup and some .ini files but to no avail. All I can suggest is to try E-mailing the Epic and see if they can either help you or direct you to some help. Be patient, it'll all work out in the end. I personally just got through a big snag with my own UT problems that took 3 1/2 weeks to get an answer. Best of Luck. Beer eases pain.

9th Jun 2000, 04:21 PM	#7
HashX Registered User Join Date: Jun. 8th, 2000 Location: Bowie, Md. Posts: 4	I found something in the userini that showed something about JoyX=axis.....