|26th Mar 2005, 06:43 AM||#1|
Surface Lighting Error
For some reason the end of the righthand wall (see attatched image) won't light up. I have searched, and yes I am using an ATI card but setting HseHardwareTL to false doesn't change a thing.
The light along this wall are the same as the lights along most of the other walls, as I just duplicated them.
Eagles may soar, but wolves don't get sucked into jet engines.
Last edited by The_Wolf; 26th Mar 2005 at 06:45 AM. Reason: Forgot to attatch image!
|26th Mar 2005, 02:42 PM||#2|
i had the same problem with sum static meshes that wouldnt light up properly and sum walls, heres what i changed and it fixed it for me, hope it works for u. if its a static mesh or if you have this option go to its properties and change it to
also try changing the level properties, this can really help ur ligthing issues and it looks cool too! in Level Properties find Zone light and change it to this, it may seem dark at first but add lights and you will see the wondeful changes take place, (hopefully)
zone light-Ambient Brightness =10
-Ambient Hue =0
-Ambient Saturation =255
-Distance fog blend =1.000000
-Distance fog end =5000.000000
-Distance fog colour A=0
-Distance Fog start =3000.000000
-Dramatic lighting =1.200000
you might find that sum of these properties dont need changing.
also another good tip is too load up a different map that has the lighting effects you want etc.. and simply copy it hope this helps.
dont forget to rebuild after the changes to see the changes! and also you might want to make a copy of the mpa elsewhere incase you mess things up even more
Last edited by INIQUITOUS; 26th Mar 2005 at 02:48 PM.
|26th Mar 2005, 11:04 PM||#3|
Have you tried deleting the whole section (actually I'd use cut), full rebuild, replace, full rebuild? You might just have a faulty lightmap that UEd refuses to redo (or the UEd Goblin has taken a disliking to), doing that should flush it.
|26th Mar 2005, 11:07 PM||#4|
My solution here:
Although I don't know if that is the problem in this case.
Unreal Development Kit Game Programming with UnrealScript: Beginner’s Guide
Stubborn Horse Studios - Angel Mapper
To have said goodbye to things!
|27th Mar 2005, 01:10 AM||#5|
Join Date: Jan. 10th, 2004
Location: Richmond, VA
That's pretty slick, Angel. Whenever it happens to me, I right-click the brush and go Polygons -> To Brush, delete the original, then add/subtract to redo the brush. Usually fixes it.